Veradel® 3330GF    
    
聚醚砜    
    
Solvay Specialty Polymers   
     
 Technical Data    
     

产品说明

Veradel 3330GF is a 30% glass fiber reinforced grade of polyethersulfone (PESU). Adding glass fiber to polyethersulfone substantially increases the rigidity, tensile strength, creep resistance, dimensional stability and chemical resistance of the material, while maintaining most of its other basic characteristics. The combination of structural properties and cost effectiveness make this resin an attractive alternative to metals in many engineering applications.

Veradel 3330GF PESU is an opaque, grayish material in its natural form. However, it can be readily colored. This grade was formerly marketed as Gafone™ PESU

总体

材料状态 • 已商用：当前有效   
资料 1 •  Technical Datasheet
  
UL Yellow Card 2 •  E36098-100036984
  
   E36098-100168880
  
 •    
Search for UL Yellow Card •  Solvay Specialty Polymers
  
 • Veradel®   
     
供货地区 • 北美洲 • 南美洲 • 亚太地区 
 • 非洲和中东 • 欧洲  
     
填料/增强材料 • 玻璃纤维增强材料, 30% 填料按重量  
 • 尺寸稳定性良好 • 流动性中等 • 热稳定性，良好 
 • 刚性，高 • 耐化学性良好  
    • 韧性良好 
性能特点 • 高拉伸强度 • 耐热性，高  
    • 中等分子量 
 • 良好的抗蠕变性 • 耐水解性  
    • 阻燃性能 
 • 良好粘结性 • 耐酸  
     
 • 电池 • 工业领域： • 水暖器材 
 • 电气/电子应用领域 • 家电部件  
用途 • 电气部件 • 金属置换 • 微波炉炊具 
 • 电器用具 • 汽车电子 • 营业设备 
 • 阀门/阀门部件 • 食品服务领域  
机构评级 • NSF 61 3   
RoHS 合规性 • RoHS 合规   
外观 • 不透明 • 可用颜色  
形式 • 颗粒料   
加工方法 • 注射成型   

 物理性能 额定值单位制 测试方法
 比重 1.58g/cm³ ASTM D792
 熔流率 (343°C/2.16 kg) 4.5g/10 min ASTM D1238
 收缩率 - 流动 0.30% ASTM D955
 吸水率 (24 hr) 0.40% ASTM D570
 机械性能 额定值单位制 测试方法
 拉伸模量 8620MPa ASTM D638
 抗张强度 130MPa ASTM D638
 伸长率 (断裂) 1.9% ASTM D638
 弯曲模量 8620MPa ASTM D790
 弯曲强度 179MPa ASTM D790
 冲击性能 额定值单位制 测试方法
 悬壁梁缺口冲击强度 75J/m ASTM D256
 热性能 额定值单位制 测试方法
 热变形温度 (1.8 MPa, 未退火) 216°C ASTM D648
 线形膨胀系数 - 流动 0.000031cm/cm/°C ASTM D696
1 / 3  
  
  
   
  
  
 
Veradel® 3330GF      
聚醚砜      
      
Solvay Specialty Polymers   
      
  电气性能 额定值单位制 测试方法 
     
  体积电阻率 > 1.0E+16ohm•cm ASTM D257 
  介电强度 17kV/mm ASTM D149 
  介电常数  ASTM D150 
  60 Hz 4.11     
  1 kHz 4.13     
  1 MHz 4.17     
  耗散因数  ASTM D150 
  60 Hz 0.0019     
  1 kHz 0.0018     
  1 MHz 0.0094     
  可燃性 额定值单位制 测试方法 
  UL 阻燃等级 5 (0.787 mm) V-0 UL 94 
        
  注射 额定值单位制     
  干燥温度 149 到 177°C     
  干燥时间 2.5 到 4.0hr     
  加工（熔体）温度 343 到 399°C     
  模具温度 149 到 163°C     
  注射速度 快速     
  螺杆压缩比 2.0:1.0     

备注
1 通过这些链接您能够访问供应商资料。我们尽量保证及时更新资料；不过您可以从供应商处了解最新资料。

2 A UL Yellow Card contains UL-verified flammability and electrical characteristics. UL IDES continually works to link Yellow Cards to individual plastic materials in Prospector, however this list may not include all of the appropriate links. It is important that you verify the association between these Yellow Cards and the plastic material found in Prospector. For a complete listing of Yellow Cards, visit the UL Yellow Card Search.

3 Tested at 82 °C (180 °F) (Commercial Hot). Only products bearing the NSF Mark are Certified.

4 一般属性：这些不能被视为规格。

5 These flammability ratings are not intended to reflect hazards presented by these or any other materials under actual fire conditions.