Veradel® 3600    
    
聚醚砜    
    
Solvay Specialty Polymers   
     
 Technical Data    
     

产品说明

Veradel® PESU was formerly marketed as Gafone™ PESU

Veradel 3600 polyethersulfone (PESU) is a very high melt flow, transparent grade that offers high heat deflection temperatures, excellent toughness and dimensional stability, and resistance to steam, boiling water and mineral acids. Other desirable properties include thermal stability, creep resistance and inherent flame resistance.

Veradel 3600 is suggested for compounding, especially of glass or carbon fiber reinforced compounds. It is FDA compliant and is therefore approved for direct food contact.

Three other grades are available: Veradel 3200, a low melt flow grade that can be processed by extrusion or injection molding and Veradel 3300, a medium melt flow grade suggested for general purpose injection molding and Veradel 3400, a high melt flow grade designed for easy molding of parts with thin walls or long flow lengths.

总体

材料状态 • 已商用：当前有效   
资料 1 •  Technical Datasheet
  
UL Yellow Card 2 •  E36098-100168885
  
Search for UL Yellow Card •  Solvay Specialty Polymers
  
 •  Veradel®
  
    
供货地区 • 北美洲 • 南美洲 • 亚太地区 
 • 非洲和中东 • 欧洲  
    
 • 尺寸稳定性良好 • 流动性高 • 热稳定性，良好 
 • 低分子量 • 耐化学性良好  
   • 韧性良好 
性能特点 • 高拉伸强度 • 耐热性，高  
   • 中等硬度 
 • 良好的抗蠕变性 • 耐水解性  
   • 阻燃性能 
 • 良好粘结性 • 耐酸  
    
用途 • 复合物   
RoHS 合规性 • RoHS 合规   
外观 • Transparent - Slight Yellow   
形式 • 颗粒料   
加工方法 • 复合 • 注射成型  

 物理性能 额定值单位制 测试方法
 比重 1.37g/cm³ ASTM D792
 熔流率 (380°C/2.16 kg) 75g/10 min ASTM D1238
 收缩率 - 流动 0.60% ASTM D955
 吸水率 (24 hr) 0.50% ASTM D570
 Water Absorption - 30 days 1.9% ASTM D570
 机械性能 额定值单位制 测试方法
 拉伸模量 2690MPa ASTM D638
 抗张强度 88.9MPa ASTM D638
 伸长率 (屈服) 6.5% ASTM D638
 弯曲模量 2620MPa ASTM D790
 弯曲强度 125MPa ASTM D790
 冲击性能 额定值单位制 测试方法
 悬壁梁缺口冲击强度 53J/m ASTM D256
 热性能 额定值单位制 测试方法
 热变形温度 (1.8 MPa, 未退火, 注塑) 200°C ASTM D648
 线形膨胀系数 - 流动 0.000052cm/cm/°C ASTM D696
 电气性能 额定值单位制 测试方法
 体积电阻率 1.7E+15ohm•cm ASTM D257
 介电强度 15kV/mm ASTM D149
1 / 3  
  
  
   
  
  
 
Veradel® 3600      
聚醚砜      
      
Solvay Specialty Polymers   
      
  电气性能 额定值单位制 测试方法 
     
  介电常数  ASTM D150 
  60 Hz 3.51     
  1 kHz 3.50     
  1 MHz 3.54     
  耗散因数  ASTM D150 
  60 Hz 0.0017     
  1 kHz 0.0022     
  1 MHz 0.0056     
  可燃性 额定值单位制 测试方法 
  UL 阻燃等级 4 (1.50 mm) V-0 UL 94 
        
  注射 额定值单位制     
  干燥温度 177°C     
  干燥时间 2.5hr     
  加工（熔体）温度 343 到 385°C     
  模具温度 149 到 163°C     
  注射速度 快速     
  螺杆压缩比 2.2:1.0     
  挤出 额定值单位制     
  干燥温度 177°C     
  干燥时间 2.5hr     
  第1气缸区温度 335 到 391°C     
  第2气缸区温度 335 到 391°C     
  第3气缸区温度 335 到 391°C     
  第4气缸区温度 335 到 391°C     
  第5气缸区温度 335 到 391°C     
  连接器温度 327 到 371°C     
  熔体温度 343 到 391°C     
  模具温度 327 到 371°C     

备注
1 通过这些链接您能够访问供应商资料。我们尽量保证及时更新资料；不过您可以从供应商处了解最新资料。

2 A UL Yellow Card contains UL-verified flammability and electrical characteristics. UL IDES continually works to link Yellow Cards to individual plastic materials in Prospector, however this list may not include all of the appropriate links. It is important that you verify the association between these Yellow Cards and the plastic material found in Prospector. For a complete listing of Yellow Cards, visit the UL Yellow Card Search.

3 一般属性：这些不能被视为规格。

4 These flammability ratings are not intended to reflect hazards presented by these or any other materials under actual fire conditions.